Application of sticky bone combined with concentrated growth factor (CGF) for horizontal alveolar ridge augmentation of anterior teeth: a randomized controlled clinical study.

OBJECTIVE: This study was designed to estimate the effect of sticky bone combined with concentrated growth factor (CGF) on anterior alveolar horizontal augmentation during implantation. METHODS: Twenty-eight patients were randomly assigned to either the test group (Group 1, n = 14) or the control group (Group 2, n = 14). Patients in Group 1 and Group 2 underwent GBR using sticky bone combined with CGF and bone powders mixed with saline, respectively. On postoperative Day 7, the patients completed the visual analogue scale (VAS). Three-dimensional models of maxillary alveolar bone were reconstructed from CBCT data at different periods, and the bone volume conversion rate was calculated with the assistance of a measurement marker guide. Labial bone thickness before and after trauma closure and bone density at six months postoperatively were also measured. RESULTS: The mean bone volume conversion rate for Group 1 (72.09 ± 12.18%) was greater than that for Group 2 (57.47 ± 9.62%, P = 0.002). The VAS score was lower for Group 1 than for Group 2 (P = 0.032). At six months postoperatively, greater bone density was found in patients in Group 1 than in those in Group 2, although the difference was not statistically significant (P > 0.05). The change in the thickness of the labial bone graft material in Group 1 was smaller than that in Group 2 (P = 0.025). CONCLUSION: Sticky bone combined with CGF was able to achieve better bone augmentation than conventional GBR. With excellent mechanical properties and the capacity to release growth factors, sticky bone is an ideal material for bone grafting. TRIAL REGISTRATION: The study was registered at the Chinese Clinical Trial Registry on 10/04/2022 (Identification number: ChiCTR2200058500).

Time management in multistep periodontal and implant treatments: a practical guide.

In addition to the proper selection of techniques, appropriate treatment sequencing and prioritization are prerequisites for successful periodontal and implant procedures. The aim of this study was to provide evidence-based time frames for various procedures pertaining to periodontal and implant treatment. A literature review was conducted to collect data on tissue healing; in areas in which data were lacking, the viewpoints of experienced clinicians were solicited to establish a consensus. This review reports recommended time frames for the healing processes associated with surgical crown-lengthening procedures (both functional and esthetic), fresh socket management, alveolar ridge management, soft tissue management, sinus floor augmentation, implant loading, and peri-implant defect management.

Peri-Implant Mucosal Fenestration and Histologic Observation of Bone Xenograft Material 7-Years After Implant Installation: A Case Report.

Bone augmentation is often required before the installation of dental implants. Here, we report a case for a patient who previously received bone augmentation at the upper right jaw using a xenogenic graft, followed by successful implant installation. Seven years later, the patient presented with mucosal fenestration with bone exposure at the area and gave a history of a recent diagnosis of cutaneous lichen planus. Several attempts were made to manage the situation, and finally, we resorted to connective tissue graft placement at the site. A piece of bone was sent for histologic evaluation, where the results indicated the presence of un-resorbed graft material surrounded by inflammatory cells, with no evidence of bone formation in the area. The case presents histologic evidence for the lack of new bone formation using xenograft over the evaluation period. The case also shows lichen planus, a possible cause for oral complication for patients undergoing augmentation and implant installation.

Evaluating risk factors and complications in mandibular ramus block grafting: a retrospective cohort study.

OBJECTIVES: This retrospective cohort study aimed to identify the complications and risk factors associated with alveolar grafting using autologous mandibular ramus grafts, guided by the research question: What are the complications encountered in patients undergoing alveolar bone grafting using autologous mandibular ramus block and what are the risk factors associated with the development of these complications? MATERIALS AND METHODS: The study included 70 patients who underwent alveolar crest augmentation with autologous mandibular ramus block grafting. Intraoperative, early postoperative, and late postoperative complications were analyzed, as were various risk factors. RESULTS: The results showed that the majority of patients had successful outcomes with minimal complications. Sex was found to significantly influence the visibility of the inferior alveolar nerve (IAN). Early postoperative complications were associated with IAN visibility and the use of a single screw for graft fixation. Late postoperative complications were significantly associated with the presence of infection. CONCLUSION: The findings emphasize the importance of careful surgical techniques, infection prevention, and patient selection in minimizing complications. CLINICAL RELEVANCE: This article may contribute to clinicians' and so patients' understanding of potential risk factors associated with over all ramus block grafting procedure. Based on this information, clinicians can also improve their ability to manage risk factors and associated complications and compare ramus block grafting with other alternatives to determine the best treatment approach for that particular patient.

[A prospective cohort study on the effect of implant restoration following micro crestal flap-alveolar ridge preservation at molar extraction sockets with severe periodontitis].

Objective: To evaluate the survival rate, success rate, soft tissue conditions and marginal bone level changes of implants following micro crestal flap-alveolar ridge preservation at molar extraction sockets with severe periodontitis, compared to natural healing. Methods: From March 2015 to January 2017, patients scheduled for molar extraction as a consequence of severe periodontitis and planned implant-retained prostheses from Department of Periodontology Peking University School and Hospital of Stomatology were selected. A total of 40 molar extraction sockets from 40 patients received implant placement following micro crestal flap-alveolar ridge preservation or natural healing. The front consecutive 20 teeth were assigned to the natural healing group, and the back ones were assigned to the micro crestal flap-alveolar ridge preservation (MCF-ARP) group. The superstructures were placed 6 months later. Within 2 weeks (baseline) and 1, 2 and 3 years after implant crown restoration, modified plaque index, probing depth, modified bleeding index and keratinized tissue width were recorded every six months. Parallel periapical radiographs were taken to evaluate the peri-implant marginal bone level and to calculate marginal bone loss. Independent sample t test or Mann-Whitney U test were used to compare the differences in the above clinical and imaging indicators between the two groups. Results: The implant survival rate and success rate of the two groups were both 100% (20/20). There were no significant differences in the modified plaque index, probing depth, modified bleeding index, buccal keratinized tissue width and marginal bone loss between two groups at 1, 2 and 3 years after implant crown restoration (all P>0.05). Marginal bone loss was 0.22 (0.14, 0.34) mm in the natural healing group and 0.21 (0.12, 0.30) mm in the MCF-ARP group at a 3-year post-loading evaluation. Conclusions: Within the limitations of the present study, implants placed at ridge preserved and naturally healed molar extraction sockets with severe periodontitis demonstrate comparable clinical outcomes at a 3-year post-loading evaluation.

[Risk factors and prevention for implant treatment in patients with periodontitis].

In patients with periodontitis, due to problems of periodontal tissue infection as well as soft and hard tissues defects, it may lead to implant infection, gingival papilla loss, soft tissue recession and poor coordination with adjacent teeth. For such patients, periodontal infection should be actively controlled before dental implant therapy. In consideration of insufficient soft and hard tissues, alveolar ridge preservation and soft tissue augmentation procedure can be used to preserve or increase soft and hard tissues as much as possible. Multi-disciplinary treatment is often needed for occlusion problems and coordination with adjacent tooth. Periodontal maintenance treatment of implants and natural teeth is also necessary after implant therapy. This paper discussed these risk factors and strategies for prevention and control, in order to provide some clinical guidances for the implant treatment of periodontitis patients.

Histologic wound healing in studies using different ridge preservation protocols: A review.

BACKGROUND: Alveolar ridge preservation (ARP) procedures are designed to lessen dimensional changes in the alveolar ridge after tooth extraction. Wound healing after ridge preservation involves the formation of new vital bone in the former socket, and this vital bone is important in the osseointegration of dental implants. METHODS: A series of ARP studies have been performed to help clinicians better understand the wound-healing events that occur following tooth extraction and ridge preservation. Different protocols have been examined using various materials and periods of healing time prior to implant placement. The primary aim of these studies was to ascertain the relative percentage of vital bone formation, residual graft material, and connective tissue (CT)/other at the healing site using histomorphometric examination of bone core biopsies obtained during osteotomy preparation. RESULTS: For allografts, the use of demineralized bone alone or in combination with mineralized is associated with more vital bone formation than the use of mineralized allograft alone. For mineralized allografts, the use of cortical versus cancellous bone has only minimal impact on new bone formation. Xenografts from bovine and porcine sources appear to have similar vital bone formation. Longer healing times prior to implant placement are associated with increased vital bone formation and decreased residual graft material. The most stable component in most studies is the percentage of CT/other. CONCLUSIONS: The percentage of vital bone and residual graft at ARP sites is dependent on the materials used and the length of healing time prior to obtaining core biopsies. KEY POINTS: What factors may affect the amount of new bone at the ARP site? At a time point about 4 months after ARP, the type of graft material used for ARP plays a large role in new bone formation. Studies focus on means and standard deviations, but patients often do not "follow the mean." Even if a single ARP protocol is used for all patients, there is great interindividual variability in new bone formation, and there is often variability between sites within a single patient. How long after ARP with an allograft should I wait to place an implant? Longer healing times such as 4-5 months generally provide higher amounts of vital bone formation than shorter healing times like 2-3 months. Differences in vital bone formation between ARP protocols tend to decrease with longer healing time. FDBA that contains demineralized bone, either alone or combined with mineralized FDBA, often provides higher amounts of new bone formation than 100% mineralized allograft, especially at shorter healing periods. Even a year after ARP with an allograft, residual graft material is often still present at the ARP site.

Ramus Frame Dental Implant Functional Survival and Safety in Severely Atrophic Edentulous Human Mandibles.

Ramus frame dental implants were retrospectively studied in 360 adults with severely atrophic edentulous mandibles. Patient records up to 12 years post-treatment were independently reviewed after a single clinician surgically placed titanium long-arm ("Tatum") ramus frame implants and immediately loaded them with a mandibular overdenture. A total of 11 ramus frames were removed at 19 to 109 months post-treatment, mostly due to supramucosal bar fracture (N = 6) or mobility (N = 3). Kaplan-Meier product-limit analysis revealed the post-treatment survival probability for functional ramus frame implants to be 99.3% at 2 years (266 patients), 98.9% at 3 years (223 patients), 97.9% at 4 years (198 patients), 96.9% at 5 years (160 patients), 96.9% at 6 years (123 patients), 95.0% at 7 years (86 patients), 95.0% at 8 years (67 patients), 93.3% at 9 years (43 patients), and 91.1% at 10 years (25 patients). No statistically significant differences in functional ramus frame implant survival were found relative to patient gender, smoking, presence of natural maxillary teeth, or compliance with semi-annual maintenance care. Fracture of endosseous anterior feet/posterior arms was the most frequent implant-related complication on 29 implants, which were left in place, repaired, or replaced in situ without implant removal. At 5 years, the ramus frame implant functional survival probability without any implant-related biological or mechanical complication was 88.9%. Ramus frame dental implants, immediately loaded with a fully implant-borne mandibular overdenture, exhibited a high degree of long-term functional survival and safety in severely atrophic edentulous human mandibles.

Clinical and Radiographic Outcomes of Autogenous Inlay Graft vs Autogenous Onlay Graft for Anterior Maxillary Horizontal Ridge Augmentation: A Randomized Control Clinical Study.

AIM: This study aimed to compare the efficacy of autogenous onlay and inlay grafts for anterior maxillary horizontal ridge augmentation. MATERIALS AND METHODS: This randomized clinical trial was performed on 14 patients with a deficient partially edentulous anterior maxillary ridge (3-5 mm in width). Patients were randomized and grouped into two equal groups: Group A was treated with symphyseal autogenous bone block, which was placed and fixed buccally as an onlay graft, and group B: was treated with symphyseal autogenous bone block, which was interpositioned and fixed in space created between buccal and lingual cortex as inlay graft. Patients were evaluated clinically and radiographically to evaluate the increase of bone width at [Baseline, immediate postoperative (T0)] and six months post-graft (T6). RESULTS: A total of 14 patients (8 males and 6 females) with age range from 20 to 43 years old with a mean of 42.1 years were involved in our study. Radiographically, there was a significant statistical difference in comparing between two groups for the creation of a horizontal alveolar bone at T0. In the inlay group, the mean preoperative bone width was 3.9 ± 0.3 mm at T0 and 5.7 ± 0.5 mm at T6. While in the onlay group, the mean preoperative bone width was 3.7 ± 0.7 mm at T0 while at T6 the mean bone width was 6.1 ± 0.8 mm. This was statistically significant. CONCLUSION: Inlay block graft appears to be a successful treatment option for horizontal ridge augmentation in the maxillary arch. CLINICAL SIGNIFICANCE: both techniques are viable techniques for augmentation of atrophic alveolar ridge with uneventful healing. How to cite this article: Elsayed AO, Abdel-Rahman FH, Ahmed WMAS, et al. Clinical and Radiographic Outcomes of Autogenous Inlay Graft vs Autogenous Onlay Graft for Anterior Maxillary Horizontal Ridge Augmentation: A Randomized Control Clinical Study. J Contemp Dent Pract 2024;25(2):107-113.

Efficacy of bone ring grafts for the reconstruction of alveolar ridge deficiencies: A systematic review. Part I: Clinical trials.

BACKGROUND: Bone ring (BR) grafts have been introduced to reconstruct alveolar ridge defects with simultaneous implant placement, but its clinical effectiveness remains undetermined. This systematic review aimed to comprehensively investigate BR grafts in diverse scenarios of ridge defect with simultaneous or staged implant placement. METHODS: Electronic retrieval of MEDLINE, Embase, Cochrane Library(CENTRAL), Web of Science, Scopus, and citation search until August 3, 2023, was used to identify relevant clinical articles that utilized BR grafts for ridge defect reconstruction. The quality of evidence in the studies reviewed was assessed with the Joanna Briggs Institute Critical Appraisal tool. The protocol was registered in Prospective Register of Systematic Reviews (CRD42023453943). RESULTS: Fourteen studies with 251 BRs were identified, of which 8 studies were for alveolar ridge augmentation, 4 studies were for extraction socket augmentation, and 2 studies were for sinus floor elevation. Reported sources of BRs included autografts, allografts, and xenografts. The follow-up period ranged from 4 months to 4.7 years. Regarding the primary outcomes, the utilization of BR grafts demonstrated favorable bone gain along with acceptable graft absorption and marginal bone loss. Regarding the secondary outcomes, satisfactory bone mineral density and implant stability were confirmed, accompanied by a recorded incidence of postoperative complications (20 cases) and an implant failure rate of 5.58%. CONCLUSIONS: BR grafting with simultaneous or staged implant insertion is an effective approach for reconstructing alveolar ridge deficiencies. The BR grafts demonstrate favorable bone remodeling and osteointegration with the alveolar bone and implant; however, its success may be compromised by complications. Future studies should further investigate the clinical efficacy of BR grafting comparing to other bone augmentation techniques in diverse scenarios.

Semi-customized three-dimensional ultra-fine titanium meshes in guided bone regeneration for implant therapy in severe alveolar bone defect: a case report.

This case report provides a detailed description of a simple and fast bone regeneration procedure using a semi-customized three-dimensional ultra-fine titanium mesh. A 50-year-old male with a severe vertical and horizontal bone defect in the anterior mandible underwent implant treatment in a staged approach. The autologous bone was combined with a xenograft, and the mixture was grafted to augment the bone defect and covered with semi-customized ultra-fine titanium meshes, which were selected among its various types according to size and configuration of the bone defect, directly connected and immobilized on the tenting screws with minimal shaping. In a postoperative 6 months re-entry surgery, the performed titanium meshes were removed, implants were placed, and a bone core biopsy was obtained that demonstrated satisfactory new bone formation. Finally, two months later, the definitive prosthesis was installed. This semi-customized ultra-fine titanium mesh could help an implant clinician obtain more predictable results in the guided bone regeneration (GBR).

[Elimination of defects in the Schneiderian membrane during sinus lift operations]. / Ustranenie defektov membrany Shneidera vo vremya provedeniya operatsii sinus-liftinga.

PURPOSE: Evaluation of the effectiveness of a new method of plasty of an extensive defect in the mucous membrane of the Schneiderian membrane, which occurs during the sinus lift operation, using an artificial collagen membrane and a developed method for fixing it. MATERIAL AND METHODS: A total of 188 patients took part in the study, all of these patients underwent an open sinus lift operation with simultaneous or delayed implantation. Operations were performed under balanced anesthesia. Six months after the operation, according to computed tomography, the height of the formed bone regenerate was estimated. In the area of each missing tooth, the initial bone height and the resulting bone grafting were assessed. Then we compared the average values before and after the operation, the average height difference before and after the operation. RESULTS: In 19 patients during the sinus lift there was an accidental extensive rupture of the mucous membrane of the maxillary sinus. Elimination of the mucosal defect was carried out according to our patented method. All 188 patients were diagnosed with partial loss of teeth with bone tissue deficiency in the distal maxillary sinus. The height of the alveolar process in the projection of missing teeth ranged from 0.5 mm to 5 mm. Delayed dental implantation was performed when the height of the alveolar bone was less than 3 mm, direct when the presence of 3-5 mm. After 6 months, dental implants were installed in the reconstruction zone, after another 6 months - rational prosthetics. CONCLUSIONS: The proposed method of plastic surgery has the following advantages. Firstly, it allows to eliminate the defect of the mucous membrane together with an increase in the height of the alveolar ridge. Secondly, after this method, the integrity of the mucous membrane will be restored. Thirdly, with an alveolar bone height of 3 mm or more, dental implants should also be installed.

Vertical alveolar bone augmentation of atrophied posterior mandibular regions with simultaneous dental implant placement using allogeneic bone rings vs autogenous bone rings: a randomized controlled clinical trial.

OBJECTIVE: Ideal implant placement in atrophied posterior mandibular regions is challenging due to surgical difficulties and anatomical limitations. This study aimed to evaluate the use of allogeneic bone rings for vertical augmentation of atrophied posterior mandibular regions with simultaneous implants compared to autogenous bone rings, while avoiding donor site morbidity. METHOD AND MATERIALS: A total of 24 vertically atrophied posterior mandibular segments (in 14 patients) were equally randomized into a study group in which mineralized freeze-dried allogeneic bone rings were used, and a control group in which autogenous bone rings with prepared implant osteotomies were harvested from the chin and used. All augmentation sites were prepared before inserting the bone rings. Implants were simultaneously inserted, fixing the bone rings into the native bone. All patients were clinically assessed after 1 week, 2 weeks, and 1 month. Crestal bone level was radiographically assessed after 1 week, 6 months, and 3 months of prosthetic loading. RESULTS: None of the 24 bone rings showed signs of implant or graft failure. There was no significant difference in the crestal bone level between the groups. CONCLUSION: Allogeneic bone rings can be a viable alternative to autogenous bone rings in augmenting the posterior aspect of the mandible, mitigating the concerns associated with donor site complications.

Alveolar ridge splitting and simvastatin loaded xenograft for guided bone regeneration and simultaneous implant placement: randomized controlled clinical trial.

OBJECTIVES: The present study goal was to assess clinically and radiographically using simvastatin (SMV) loaded xenograft for guided bone regeneration (GBR) around simultaneously placed implants with alveolar ridge splitting in patients with horizontally atrophic jaw defect. MATERIALS AND METHODS: Randomized distribution of the twenty-two patients into two groups (11 patients each) was performed. Group I participants received alveolar ride splitting (ARS) with GBR using SMV gel mixed bone graft and a barrier membrane with simultaneous implant placement. Group II received the same treatment protocol without SMV gel. At the baseline, 6- and 9-months post-surgery, clinical and radiological alterations were assessed. RESULTS: Six months after therapy, PES records of group I were statistically significantly improved than those of group II (P < .001). Group I exhibited statistically significant expansion of the alveolar ridge over group II after 6 and 9 months (P < .001). When compared to group II over the evaluation interval between 6 and 9 months, group I demonstrated statistically substantially minimal loss of the mean marginal bone level (P < .001). At the 6- and 9-month observation periods, bone density gain was considerably higher in group I than that in group II (P < .001). CONCLUSION: Alveolar ridge splitting along with GBR-augmented SMV improve the clinical and radiographical outcomes around dental implant over GBR alone. CLINICAL RELEVANCE: Augmenting GBR with SMV in alveolar ridge splitting could boost implant osseointegration and enhance peri-implant tissue changes. CLINICAL TRIAL REGISTRATION: NCT05020405.

Clinical outcomes following a combined vertical and horizontal alveolar ridge augmentation and two-stage implant placement using either autogenous tooth roots or autogenous bone blocks.

AIM: To assess and compare the short-term clinical outcomes following a combined vertical and horizontal alveolar ridge augmentation and two-stage implant placement using either autogenous tooth roots (TR) or autogenous bone blocks (AB). MATERIALS AND METHODS: A total of n = 27 patients (TR/AB: 13/14) exhibiting n = 31 implants (TR/AB: 14/17) were available for the analysis. Each subject had been allocated to a combined vertical and horizontal alveolar ridge augmentation using either (1) healthy TR (e.g., retained wisdom teeth), or (2) monocortical AB harvested from the retromolar area (i.e. external oblique line). Clinical parameters (e.g., bleeding on probing, BOP; probing pocket depth, PD; mucosal recession, MR) were recorded after a follow-up period of 16.03 ± 4.3 months following implant placement. RESULTS: The survival rates amounted to 100% in both groups. TR and AB grafted sites were associated with similar changes in mean BOP (8.97 ± 27.73%; 11.90 ± 18.97%), PD (0.53 ± 0.49; 0.47 ± 0.67 mm), and MR (0.03 ± 0.13; 0.0 ± 0.02 mm) values. The incidence of peri-implant mucositis and peri-implantitis at the patient level amounted to 15.38% and 0.0% in the TR-, and 28.57% and 7.14% in the AB group. CONCLUSIONS: Both surgical procedures were associated with peri-implant tissue health and stability on the short-term.

Alveolar ridge preservation of two-wall bone defects using mineralized dentin matrix: An experimental pre-clinical study.

OBJECTIVES: To study bone healing of two-wall bone defects after alveolar ridge preservation using mineralized dentin matrix. MATERIALS AND METHODS: After distal roots extraction of second and fourth premolars (P2, P4) on one lateral mandible in 12 beagles, two-wall bone defects (5 × 5 × 5 mm) were surgically created distally to the remaining mesial roots of P2 and P4. A total of 24 sites were randomly allocated to three groups (implant material- time of execution): mineralized dentin matrix (MDM)-3 m (MDM + collagen membrane; 3 months), MDM-6 m (MDM particles + collagen membrane; 6 months), and C-6 m (collagen membrane only; 6 months). Clinical, radiographic, digital, and histological examinations were performed 3 and 6 months after surgery. RESULTS: The bone healing in MDM groups were better compared to Control group (volume of bone regenerated in total: 25.12 mm3 vs. 13.30 mm3, p = .046; trabecular volume/total volume: 58.84% vs. 39.18%, p = .001; new bone formation rate: 44.13% vs. 31.88%, p = .047). Vertically, the radiological bone level of bone defect in MDM-6 m group was higher than that in C-6 m group (vertical height of bone defect: 1.55 mm vs. 2.74 mm, p = .018). Horizontally, no significant differences in buccolingual bone width were found between MDM and C groups at any time or at any level below the alveolar ridge. The percentages of remaining MDM were <1% in both MDM-3 m and MDM-6 m groups. CONCLUSIONS: MDM improved bone healing of two-wall bone defects and might be considered as a socket fill material used following tooth extraction.

Histological and radiological outcome after horizontal guided bone regeneration with bovine bone mineral alone or in combination with bone in edentulous atrophic maxilla: A randomized controlled trial.

OBJECTIVE: To assess the radiological and histological outcome after horizontal guided bone regeneration (GBR) with deproteinized bovine bone mineral (DBBM) alone or in combination with particulate autogenous bone (PAB). MATERIALS AND METHODS: Eighteen edentulous patients with an alveolar ridge of ≤4 mm were included in this split-mouth randomized controlled trial. Horizontal GBR with a graft composition of 100% DBBM (100:0) on one side and 90% DBBM and 10% PAB (90:10) on the other side were conducted in all patients. Cone beam computed tomography (CBCT) was obtained preoperatively, immediately postoperative, and after 10 months of healing. Width and volumetric changes in the alveolar process were measured on CBCT. Implants were placed after 10 months of graft healing where biopsies were obtained for histomorphometrical evaluation. RESULTS: The gained widths were 4.9 (±2.4) mm (100:0) and 4.5 (±2.0) mm (90:10) at 3 mm from the top of the crest, and 5.6 (±1.3) mm (100:0) and 4.6 (±2.1) mm (90:10) at 6 mm from the top of the crest. The mean volumetric reductions were 32.8% (±23.8) (100:0) and 38.2% (±23.2) (90:10). Histomorphometry revealed that mean percentages of bone were 50.8% (±10.7) (100:0) and 46.4% (±11.3) (90:10), DBBM were 31.6% (±12.6) (100:0) and 35.4% (±14.8) (90:10), and non-mineralized tissue were 17.6% (±11.7; 100:0) and 18.2% (±18.2) (90:10). No significant differences were evident between in any evaluated parameters. CONCLUSIONS: There were no additional effects of adding PAB to DBBM regarding bone formation, width changes, or volumetric changes after 10 months of graft healing.

Retrospective analysis of augmentation procedures with umbrella screws, a novel tenting technique: a consecutive case series in 279 patients.

OBJECTIVES: The consecutive case series accesses the results and experiences of ridge augmentation using an umbrella screw tenting technique. METHOD AND MATERIALS: In total, 279 patients were treated between 26 May 2015 and 16 June 2021, including horizontal and vertical ridge defects. Sex, age, smoking behavior, jaw, graft material, soft tissue thickness, extent of horizontal/vertical augmentation, resorption rate, and occurrence of early/late exposure were evaluated. Bone gain was determined by resorption at the screw head. Only cases without premature screw removal were evaluated metrically (n = 201). All other augmentations were evaluated according to whether implantation was possible with or without further augmentation (n = 27). A target performance index was calculated, which should enable evidence-based comparability of different augmentation methods in future. RESULTS: In total, 54 wound dehiscences (39 early, 15 late exposures) occurred, which corresponds to 24.08% of the augmented sites; 42 umbrella screws were removed prematurely. In all cases an implantation was possible at the desired position afterwards. Cases with a vertical augmentation component showed a higher prevalence of exposure (early, P = .000; late, P = .024). The extent of the vertical augmentation was only relevant for early exposure (P = .048). Mean bone gain of 4.23 ± 1.69 mm horizontally and 4.11 ± 1.99 mm vertically could be achieved. Regression analysis showed that there was no limit in horizontal/vertical direction. Mean percentage target performance index was 75.90 ± 20.54 for vertical and 82.25 ± 16.67 for horizontal portions. CONCLUSION: The umbrella technique is an effective augmentation method, which can be applied to any defect morphology.

Clinical outcomes following atrophic alveolar ridge reconstruction using collagenated xenogeneic bone block or autogenous bone block: One-year follow-up of a randomized controlled clinical.

AIM: This investigation aimed to evaluate the 1-year survival of implants placed after staged lateral alveolar ridge augmentation using equine-derived collagenated xenogeneic bone blocks (CXBBs) or autogenous bone block (ABB). MATERIALS AND METHODS: Fifty patients who underwent lateral augmentation in a previous trial were included. The primary outcome measure was implant survival at the 1-year follow-up, and secondary outcomes included implant success, peri-implant clinical and volumetric parameters, pink aesthetic scores (PES) and patient-reported outcome measures. Data analysis involved Fisher's exact test, the Mann-Whitney U-test and the Wilcoxon signed-rank test. RESULTS: In this study, no late implant failures were observed. The cumulative survival rates were 78.6% for the CXBB group and 90.9% for the ABB group, with no difference between the groups. Similarly, the success rates were 53.6% and 63.6%, respectively, showing no significant difference. Peri-implant clinical and volumetric parameters indicated the presence of healthy peri-implant tissues surrounding implants placed in both CXBB- and ABB-augmented sites. PES were 8.5 and 11.0 for implants placed in CXBB- and ABB-augmented sites, respectively. Furthermore, patient satisfaction rates were high and similar between the groups. CONCLUSIONS: Dental implants placed in both CXBB- and ABB-augmented ridges demonstrated no statistically significant differences in clinical, volumetric and aesthetic outcomes, along with high patient satisfaction rates.

Piezosurgical Buccal Plate Repositioning Technique: A Modified Surgical Approach for the Horizontal Augmentation of Atrophied Mandibles.

PURPOSE: To demonstrate a modified surgical approach for horizontal ridge augmentation that allows for safe manipulation and predictable management of the buccal plate and avoids creation of a secondary surgical site. MATERIALS AND METHODS: This pilot randomized controlled clinical trial included 24 patients who required horizontal alveolar ridge augmentation. Patients were assigned to one of the three groups: Group A was treated with the buccal plate repositioning (BPR) technique and grafted with silica calcium phosphate nanocomposite (SCPC) graft, group B was similarly managed and grafted using demineralized freeze-dried bone allograft (DFDBA), and group C was augmented using mandibular ramus autogenous bone block graft (ABBG). The primary outcome was the coronal crest width, which was measured at 6 months using CBCT. RESULTS: The BPR technique resulted in horizontal augmentation with a mean of 4.30 ± 0.94 mm for group A, showing no significant difference from either group B (4.98 ± 1.13 mm) or group C (3.68 ± 0.27 mm). All augmented ridges allowed for successful implant placement with good primary stability. CONCLUSIONS: The BPR technique resulted in horizontal bone gain in extremely narrow alveolar ridges. It allowed for implant placement in a vascular cancellous bed protected by intact cortical plate. Different types of bone grafts, whether alloplast or allograft, resulted in successful augmentation comparable to that gained from autogenous block grafting.